PL-M120-35
Features
Item Name: P series 120 Volt Inground Multi Color Pool Bulb
Model No: PL-M120-35
Wattage: 35 Watt
Voltage: 120 Volt AC
Color : RGB Multi Color
Socket: E26 Eidson Screw
Dimension: Dia 6.7" Height 5.5"
Control Solution: CPL-120 or Power Switch (controller kit is not included in this package)
Advanced Cooling System
The PL-M120-35 inground pool lights bulb with a built-in fan as a cooling system. The average temperature will be 20-30 centigrade lower than the pool bulbs without cooling system. For LED bulbs lower temperature means longer life span and lower luminous decay.
Excellent Optical Diffuser
LAMPAOUS P series pool bulb with an optical diffuser to deal the mixed light output. All multi color LED made up by three basic color red, green and blue, A good light device should including an optical diffuser, which can produce pure and soft mixed color.
How various color produced by our P series pool bulb diffuser?
Red = Red
Green= Green
Blue=Blue
Red+ Green=Yellow
Red+Blue=Purple
Green+Blue=Cyan
Red+Green+Blue=White
5 Color Show
5 color show made up by different color and color changing speed
Mellow Wave, a two minute color sequence of the seven solid colors holding for eight seconds on each before blending to the next.
Rapid Wave, a fast change between seven solid colors in half second intervals.
Long Wave, a very slow cross-fade seven solid colors sequence holding for ten minutes before blending to the next
Anthem Wave, a red white and blue themed blend that lasts three seconds before blending to the next
Ocean Wave, simulating the transitional colors of the oceans waters from green to blue
Mutiple Control Solution
We have 2 different control solution for all P series Pool and Spa lights bulbs. Both solution are 100% reliable and almost no distance limitation. Users can use power switch, breaker or LAMPAOUS CPL-120 remote control kit to operate the P series pool lighting system. CPL-120 remote control kit is highly recommended, as that will makes the work simple. Here are main functions of the P series pool & spa lighting and control system.
Choose color show
freeze solid color from color show
synchroize multi bulbs
Color recall
More detail information about operation please visit the FAQ below both for text or video.
Compare with Others
FAQs
How to select the color show by breaker?
When the lights bulb is changing color , turn off the bulb and turn on it again with in 1-2 seconds, the light show will change from one to another
How to freeze solid color from color show by breaker?
When your favorite color displayin, turn off and turn on the bulb within 1second, the color will be frozen. If you don't like the solid color turn off and turn on the bulb within 1 second to back to the color show
How to synch multi bulbs?
Connect all P serier pool or spa bulbs to the same power switch/breaker, turn off and turn on it again within 4-5 seconds. If all bulbs red color flciker 3 times means they were synchorized, if not repeat it again until all bulbs flicker.
How to keep the last color setting
If you want to keep the last color setting , make sure the next turn on is 10 seconds after the last turn off. In another word, turn off the bulb and turn on it 10 seconds later , the last setting will stored.
My bulb stuck on one color and do not change.
Please turn off and turn on within 1 second.If still stuck on one color please turn off for 10minutes and turn off , turn on within 1 second.
My lights is flickering and some color missing and very weak
The problem caused by water, yourwas bulb damaged by water.