P Series Multi Color Remote Control Kit

I want to control the spa lights by CPL-120 control kit , how to connect them?
CPL-120 is 120Volt, and SPL-M120-15 is 12Volt, so you need to hook the 120Volt-12Volt transformer to the CPL-120 and then hook all SPL-M12-15 or PL-M12-35 to the outputside of the transformer.
How to operate multi bulbs if I use the switch or breaker to contorl the pool or spa bulbs.
Please hook all bulbs to the same switch or breaker, make sure one switch can turn on all bulbs.
How many bulbs one power switch or CPL-120 remote control kit can connected?
1-10 bulbs of SPL-12-15 or SPL-12-35 which depends the load of your transformer.

How to select the color show by breaker?
When the lights bulb is changing color , turn off the bulb and turn on it again with in 1-2 seconds, the light show will change from one to another
How to freeze solid color from color show by breaker?
When your favorite color displayin, turn off and turn on the bulb within 1second, the color will be frozen. If you don't like the solid color turn off and turn on the bulb within 1 second to back to the color show
How to synch multi bulbs?
Connect all P serier pool or spa bulbs to the same power switch/breaker, turn off and turn on it again within 4-5 seconds. If all bulbs red color flciker 3 times means they were synchorized, if not repeat it again until all bulbs flicker.
How to keep the last color setting
If you want to keep the last color setting , make sure the next turn on is 10 seconds after the last turn off. In another word, turn off the bulb and turn on it 10 seconds later , the last setting will stored.