Item Name: S2 -12-35 120Volt Pool bulb
Model No: S2-12-35
Voltage: 12Volt AC
Wattage: 35 Watt
Color: 7 Color Show + 7 Solid Color
Compatible Inground Lighting Fixture:Pentair Amerlite 789 790 791 series, Hayward Astrolite SP058 series.
What you will get
S2-12-35 Pool Bulb 1X
Color and Color Show
7 Solid color: there are 7 solid color for S2-129-35 . Red, Green , Blue, Purple (mix color of red and blue), Yellow (mix color of red and green ), Cyan (mix color of blue and green) and White (mix color of red, green and blue)
7 Color show: Beside of the 7 solid color , there 7 different color show made up with different color sequence and speed. RGB Rapid, BGR Rapid, 7 colors Rapid, RGB fade, 7 Color Fade, GB Fade, RWB Fade.
Users can use C2-12/R2 Carrier Device remote control system to select the color and color show diectly , to adjust the speed of the color show, to creat a vivid and colorful pool or spa.
3 Control Ways Control Solution
- Electric brake or On/OFF switch. If you have S2-12-35 pool bulb or S2-120-15 spa bulb but without LAMPAOUS intekit C2-12/R2 system, you can use a electric brake or on/off swtitch which connected to the pool and spa lights bulb to change the color . Each turn off and turn on again one color sequency will be cycled and 14 color program in all.
- Control panel on the carrrier device. If you have an intekit C2-12/R2 control system,Plug C2-12 to the 12Volt power and operate the color or color show by Carrier device panel
- Remote control: If you have an intekit C2-12/R2 control system, Plug the C2-12 to 12Volt power and pair the remote with the carrier device, after the pairing you can operate the S2-12-35 or S2-12-15 by remote control. Need more information about the pairing please visit the FAQ for detail
How C2-12/R2 Work with S2-12-35
We strongly recommend users to use S2-12-35 with C2-12/R2. If you use power breaker to contorl the pool bulb , you can't get the color directly , you need to cycle the color sequency one by one , and the color setting can't stored. But with C2-12/R2 everything will be simple.
Wire + Wireless Singal transmission
Inorder to avoid lack of control range for wirless signal transmission underwater , we give up wireless and chose wired solution. The remote control (R2) transmit singal to the Carrier Device (C2-12) ,and the valid range is 30-50ft above water. Then the carrier device convert the wireless signal to different frequency and delivery it to the lights bulbs by cable underwater. The S2 series pool or spa bulbs will response the carrier device immediately and no distance limitation.
Plug and play, super easy to operate the control system. plug the control kit to home power system, you can control the pool or spa lights in your yard very simple. Chose the solid color or color show, adjust the color changing speed directly, do not need to cycle the color sequency one by one, but chose it direcly by control panel or remote. With this control kit you also can one key to synch multi bulbs and recall the last color setting.