Item Name: P series 120 Volt Inground Multi Color Spa Lights Bulb
Model No: SPL-M120-15
Wattage: 15 Watt
Voltage: 120 Volt AC
Color : RGB Multi Color
Socket: E26 Eidson Screw
Control Solution: CPL-120 or Power Switch (controller kit is not included in this package)
5 Color Show
5 color show made up by different color and color changing speed
Mellow Wave, a two minute color sequence of the seven solid colors holding for eight seconds on each before blending to the next.
Rapid Wave, a fast change between seven solid colors in half second intervals.
Long Wave, a very slow cross-fade seven solid colors sequence holding for ten minutes before blending to the next
Anthem Wave, a red white and blue themed blend that lasts three seconds before blending to the next
Ocean Wave, simulating the transitional colors of the oceans waters from green to blue
All solid color can be frozen from the color show above. Users can use power breaker, CPL-120 Control kit to freeze the solid color. Here are the solid colors
Red = Red
Learn more about how to freeze the solid color please visit the FAQ for detail
Operate by Switch
- Choose Color show: Cycle one color show from another, turn off the switch and turn on it again with 1-2 seconds.
- Freeze Solid Color from Color Show: Freeze the solid color displaying in color show, turn off and turn on again within 1 seconds.
- Cancel the solid color back to color show: Turn off and turn on again within 1 second.
- Synch Multi Bulb: Turn off and turn on within 4-5 seconds
- Color Recall: Turn off and turn on after 10 seconds.
Operate by CPL-120 Remote Control
CPL-120 remote control kit is highly recommended, This control kit will makes everyting simple. Here are main functions of the P series pool & spa lighting and control system.
Choose color show
freeze solid color from color show
synchroize multi bulbs
Connect all bulbs to the output side of the black control box, press the key on black control panel or remote to operate the lights bulb .
More detail information about operation please visit the FAQ below both for text or video.
Compare with Others
How to select the color show by breaker?
When the lights bulb is changing color , turn off the bulb and turn on it again with in 1-2 seconds, the light show will change from one to another
How to freeze solid color from color show by breaker?
When your favorite color displayin, turn off and turn on the bulb within 1second, the color will be frozen. If you don't like the solid color turn off and turn on the bulb within 1 second to back to the color show
How to synch multi bulbs?
Connect all P serier pool or spa bulbs to the same power switch/breaker, turn off and turn on it again within 4-5 seconds. If all bulbs red color flciker 3 times means they were synchorized, if not repeat it again until all bulbs flicker.
How to keep the last color setting
If you want to keep the last color setting , make sure the next turn on is 10 seconds after the last turn off. In another word, turn off the bulb and turn on it 10 seconds later , the last setting will stored.
My bulb stuck on one color and do not change.
Please turn off and turn on within 1 second.If still stuck on one color please turn off for 10minutes and turn off , turn on within 1 second.
My lights is flickering and some color missing and very weak
The problem caused by water, yourwas bulb damaged by water.